Last item in stock
Clearance sale
Radice
0000118589
€9.65
€19.30
For nut propellers modelRadius old shaft 55 mm.7th dimension,5x9 cm.
Clearance sale
Radice
0000118588
€6.10
€12.20
For model propeller nut Radice old type 45 mm shaft.
Last item in stock
Clearance sale
Radice
0000118587
€12.75
€25.50
70 mm shaft propeller nut anode.radice model old model
Anodes
Max Prop
0000114753
€30.00
For sail drive, triple propeller
Motor
AD Nautic
094275
€8.75
22mm
Motor
AD Nautic
094269
€40.05
This kit allows you to isolate the anode from the hull. Includes: a neoprene plate, 2 AG4 plugs for soldering (øM14x30mm), 2 AZ5GU nuts (Ø M14), 2 neoproe tubes and 2 brass washers.
Last item in stock
Motor
AD Nautic
094268
€36.30
Aluminum anodes, more active than zinc (lifespan increased by 55%) They guarantee better protection. They are active in seawater, fresh and brackish. Lightweight and safe for the environment. Complete kit with stainless steel screws.
Array
(
[nleft] => 484
[nright] => 485
[level_depth] => 3
[id_parent] => 910
[id_shop_default] => 1
[is_root_category] => 0
[position] => 7
[date_add] => 2020-03-11 09:31:12
[date_upd] => 2025-05-09 13:23:00
[name] => Anodes
[link_rewrite] => anodes
[description] => <h2>Anodes for Boats</h2>
<p><strong>Boat anodes</strong>, also known as <strong>galvanic or sacrificial anodes</strong>, are essential components that protect metal parts of a boat from electrochemical corrosion.</p>
[additional_description] => <h3>Function of Anodes</h3>
<p>The main function of anodes is to prevent corrosion. They should be replaced at least once per season, and more frequently in harsher marine conditions. Anodes are typically installed along the keel, rudder, or propeller shaft.</p>
<p><strong>Important</strong>: Never paint, brush, or grease the anodes! This would reduce their electrical conductivity with water, rendering them ineffective against corrosion. If your boat stays out of the water for long periods, oxidation may form (especially on aluminum anodes), reducing performance. In these cases, replacement is necessary.</p>
<h4>Anode Selection Chart (in kg), based on metal surface area to protect</h4>
<p>Metal surfaces in m² / Zinc anodes in kg</p>
<ul>
<li>5 to 10 m² → 5.5 kg</li>
<li>10 to 20 m² → 9.5 kg</li>
<li>20 to 30 m² → 18.0 kg</li>
<li>30 to 40 m² → 20.0 kg</li>
<li>40 to 50 m² → 25.0 kg</li>
</ul>
<h4>Types of Anodes</h4>
<ul>
<li>Shaft and rudder anodes</li>
<li>Propeller anodes</li>
<li>Thruster anodes</li>
<li>Mooring anodes</li>
<li>Engine anodes</li>
<li>Weld-on anodes</li>
<li>Bolt-on anodes</li>
<li>Distribution board anodes</li>
<li>Heat exchanger anodes</li>
<li>Aluminum anodes</li>
<li>Special anodes for aluminum boats</li>
</ul>
<p>Find a wide range of zinc, aluminum alloy, and magnesium anodes in our store to replace your hull and engine shaft anodes, whether for inboard or outboard motors.</p>
<h4>Available Anode Types</h4>
<ul>
<li><strong>Drive shaft anodes</strong>
<ul>
<li>Aluminum anodes</li>
<li>Magnesium anodes</li>
<li>Zinc anodes</li>
</ul>
</li>
<li><strong>Hull anodes</strong>
<ul>
<li>Aluminum hull anodes</li>
<li>Magnesium hull anodes</li>
<li>Zinc hull anodes</li>
</ul>
</li>
<li><strong>Outboard anodes</strong></li>
<li><strong>Propeller anodes</strong>
<ul>
<li>Aluminum anodes for propellers/shafts</li>
<li>Magnesium anodes for propellers/shafts</li>
<li>Zinc anodes for propellers/shafts</li>
</ul>
</li>
<li><strong>Bow and stern thruster anodes</strong></li>
<li><strong>Inboard anodes</strong></li>
<li><b>Saildrive/inboard-outboard anodes</b></li>
</ul>
[meta_title] => Anodes for Boats | MercaNautic ⛵ 🌊
[meta_description] => Boat anodes, also known as galvanic or sacrificial anodes, are essential components that protect metal parts of a boat from electrochemical corrosion ⛵ 🌊
[meta_keywords] => Anodes
[extra_description] =>
[id] => 918
[image] =>
)
Function of Anodes
The main function of anodes is to prevent corrosion. They should be replaced at least once per season, and more frequently in harsher marine conditions. Anodes are typically installed along the keel, rudder, or propeller shaft.
Important: Never paint, brush, or grease the anodes! This would reduce their electrical conductivity with water, rendering them ineffective against corrosion. If your boat stays out of the water for long periods, oxidation may form (especially on aluminum anodes), reducing performance. In these cases, replacement is necessary.
Anode Selection Chart (in kg), based on metal surface area to protect
Metal surfaces in m² / Zinc anodes in kg
- 5 to 10 m² → 5.5 kg
- 10 to 20 m² → 9.5 kg
- 20 to 30 m² → 18.0 kg
- 30 to 40 m² → 20.0 kg
- 40 to 50 m² → 25.0 kg
Types of Anodes
- Shaft and rudder anodes
- Propeller anodes
- Thruster anodes
- Mooring anodes
- Engine anodes
- Weld-on anodes
- Bolt-on anodes
- Distribution board anodes
- Heat exchanger anodes
- Aluminum anodes
- Special anodes for aluminum boats
Find a wide range of zinc, aluminum alloy, and magnesium anodes in our store to replace your hull and engine shaft anodes, whether for inboard or outboard motors.
Available Anode Types
- Drive shaft anodes
- Aluminum anodes
- Magnesium anodes
- Zinc anodes
- Hull anodes
- Aluminum hull anodes
- Magnesium hull anodes
- Zinc hull anodes
- Outboard anodes
- Propeller anodes
- Aluminum anodes for propellers/shafts
- Magnesium anodes for propellers/shafts
- Zinc anodes for propellers/shafts
- Bow and stern thruster anodes
- Inboard anodes
- Saildrive/inboard-outboard anodes
